Yankee 131a screwdriver - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Yankee 131a screwdriver (/showthread.php?tid=7349256) Pages:
1
2
|
RE: Yankee 131a screwdriver - bandit571 - 07-21-2019 Now have a nice set of handles.. [attachment=19547] had to spent a whopping $4 for all of this....average was $1 a piece... RE: Yankee 131a screwdriver - kdouglaslee - 07-25-2019 (07-14-2019, 07:10 AM)perchriver Wrote: Does anyone know where I can purchase a replacement spring for a Yankee 131a. Thanks. You could always make one, here's a humorous, entertaining but very useful video on the subject, https://www.youtube.com/watch?time_continue=12&v=jAawhg6JtyY RE: Yankee 131a screwdriver - Bill_Houghton - 07-25-2019 (07-21-2019, 03:38 PM)bandit571 Wrote: Now have a nice set of handles..They're perfect! RE: Yankee 131a screwdriver - bandit571 - 07-25-2019 (07-25-2019, 12:27 PM)kdouglaslee Wrote: You could always make one, here's a humorous, entertaining but very useful video on the subject, https://www.youtube.com/watch?time_continue=12&v=jAawhg6JtyYI said earlier in the thread....I have a #131A in the shop....only thing missing is the selector switch...spring is intact..let me know where to send it... RE: Yankee 131a screwdriver - jrtcrosby - 09-02-2021 (07-14-2019, 07:10 AM)perchriver Wrote: Does anyone know where I can purchase a replacement spring for a Yankee 131a. Thanks. if you are still looking i have a bunch brand new $19.99 canadian let me know if that interests you RE: Yankee 131a screwdriver - Timberwolf - 09-03-2021 (07-25-2019, 12:27 PM)kdouglaslee Wrote: You could always make one, here's a humorous, entertaining but very useful video on the subject, https://www.youtube.com/watch?time_continue=12&v=jAawhg6JtyY.................. I have made lots of springs in the past...but This Old Tony's "wire brake" idea is a trick I will remember from this video...thanks for the link! RE: Yankee 131a screwdriver - bandit571 - 09-04-2021 These are the "other half" of what I have....seems to be one or two at about every garage sale....when they have "TOOLS!" for sale... [attachment=37492] Good thing they usually put these on a table...otherwise, I'd be tripping over the dang things RE: Yankee 131a screwdriver - Bill_Houghton - 09-04-2021 Then there are the push drills...and the eggbeater drills...and the braces... RE: Yankee 131a screwdriver - bandit571 - 09-11-2021 I might just have a few of each..... [attachment=37649] Half of the eggbeaters, maybe? [attachment=37650] Push drills, screwdrivers, braces, and more eggbeaters....and a few other tools..... RE: Yankee 131a screwdriver - mike4244 - 09-13-2021 (07-14-2019, 12:18 PM)Admiral Wrote: Yeah, unfortunately the only way is to find another 131; or find a spring in the bottom of a tool box, as many original owners removed the spring for some reason, I've found many that have had the spring taken out. I'll check to see if I have a donor (don't think so), but its a donor you need as these springs were pretty specific to the tool. Before cordless drills I used my Yankee for screwing hinges into the door and jamb. I removed the spring when I was warned that the spring action could be dangerous when installing mirrors and such. I haven't seen the spring in 50+ years. mike |