+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Red mulberry (/showthread.php?tid=7349899)
Pages:
1
2
Red mulberry - hairy - 08-23-2019
I have a section of limb that broke off of a living red mulberry tree. I cut it off the tree, painted the ends with Anchorseal, and it's been inside a shed since spring 2010. It grew in Northern Kentucky.
I would like to use it for a joiners mallet head. I'd like a big mallet head, size to be determined when I cut into it. The other end has some small checks, can't tell how far they go.
I won't know moisture content until I cut into it. The reason I want to use this piece is because it's the biggest I have to work with.
My ? 's Should I look for something else? I can't predict what it will be in a few years if I go ahead with this. Maybe warp and crack, maybe solid. I don't have a clue.
If I use it, how long should I wait before I start. I just took it out of the shed today. Thanks!!!!
10" wide x 6" tall x 16" long
RE: Red mulberry - jteneyck - 08-23-2019
Red mulberry should do nicely for your mallet head. The MC of it now is whatever the EMC in your shed is. I would cut it 1/2" oversize right away and let it sit in your shop until the weight stops decreasing. If your shed has an EMC of 18%, for example, and your shop's is 8% then you should seal the ends with paint or wax and expect to wait several weeks until the weight stabilizes. If you shop's EMC is no different than the shed, then just go ahead and make your mallet, no waiting required.
John
RE: Red mulberry - hairy - 08-23-2019
(08-23-2019, 12:15 PM)jteneyck Wrote: Red mulberry should do nicely for your mallet head. The MC of it now is whatever the EMC in your shed is. I would cut it 1/2" oversize right away and let it sit in your shop until the weight stops decreasing. If your shed has an EMC of 18%, for example, and your shop's is 8% then you should seal the ends with paint or wax and expect to wait several weeks until the weight stabilizes. If you shop's EMC is no different than the shed, then just go ahead and make your mallet, no waiting required.
John
Thanks! My shop is in the basement, air conditioned and heated.
RE: Red mulberry - jteneyck - 08-23-2019
(08-23-2019, 12:30 PM)hairy Wrote: Thanks! My shop is in the basement, air conditioned and heated.
Many here are more than a little jealous, I'm sure.
John
RE: Red mulberry - Bibliophile 13 - 08-23-2019
Use it.
Even if you get a bit of end checking (which you most likely won’t) a joiner’s mallet with checking can go right on pounding away for a long time before it actually splits.
RE: Red mulberry - tablesawtom - 08-25-2019
Worrying about the moisture content won't get you a mallet. If it checks it won't be much and if it dose it you can say it is a n antique mallet.
Tom
RE: Red mulberry - hairy - 08-25-2019
(08-25-2019, 09:12 AM)tablesawtom Wrote: Worrying about the moisture content won't get you a mallet. If it checks it won't be much and if it dose it you can say it is a n antique mallet.
Tom
I cut into it to get the blank I was looking for. Moisture content in the 11 - 12% range. I think I'm good to go.
RE: Red mulberry - Stwood_ - 08-25-2019
Yes, good to go.
Hey, I thought all mulberry was red. We (Missouri) don't call mulberry red mulberry....maybe a Ohio thing?
RE: Red mulberry - Hank Knight - 08-26-2019
(08-25-2019, 09:59 PM)Stwood_ Wrote: Yes, good to go.
Hey, I thought all mulberry was red. We (Missouri) don't call mulberry red mulberry....maybe a Ohio thing?
I have a section of mulberry log that was cut in my neighborhood a year ago. It is bright yellow.
RE: Red mulberry - Bill Holt - 08-26-2019
The few pieces of Mulberry I've turned are also yellow.
Please give us some pictures when you finish the Red Mulberry mallet.