Woodnet Forums
Shooter Conundrums - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Shooter Conundrums (/showthread.php?tid=7351394)

Pages: 1 2

RE: Shooter Conundrums - bandit571 - 11-24-2019

And can't saw a straight & square line.......
Confused
[attachment=21895]
For the thin stuff...I rely on one of my mitre boxes,  to give a square cut....and, any angle of miter cut I need...

Of course..I am dealing with wood....
Uhoh
[attachment=21896]
Of course, this could be a shooting jig...for my circular saw....
Winkgrin

Cuts with a mitre box...the hand power variety
Winkgrin
[attachment=21897]
[attachment=21898]
Then again....if one can't saw to a line......YMMV
Winkgrin

RE: Shooter Conundrums - Derek Cohen - 11-24-2019

Steven, don't take it so literally - I was just yanking your chain.
Smile

The thread is about shooting boards.

Regards from Perth

Derek

RE: Shooter Conundrums - bandit571 - 11-24-2019

hmmm..
[attachment=21906]
Shooting a pair of boards...at once...

RE: Shooter Conundrums - Derek Cohen - 11-25-2019

(11-22-2019, 10:51 PM)hbmcc Wrote: I am considering looking for a plane for shooting and need some help choosing. The Veritas BU jack has a reputation for shooting ... and it fits my price. But....

I think I got one of the early Veritas bevel up planes, the LA Smoother.  And, a handful of blades ... at 2-inch width. The LAS is too light for any shooting task. I don't use it much because it is an odd fit in my hand--maybe a traditional style handle can help. I had originally hoped the blades were the same, but the jack's is 2-1/4 wide. LV got standard blades right, after the LAS one-off blades. I have Stanley's that will cover for coarse stock prep, even smoothing, but they are no fun for shooting. For me! So the Veritas Jack is really only going to the shooting board. However, it may collect dust like its predecessor, the LAS. 

I am concerned. Options?

I took a few photos a while back of my favourite shooting board/bench hook. I have expensive shooting boards and expensive shooting planes, but ...

This must have taken me all of 30 minutes to build for a hand tool workshop I gave. Since then it has been used frequently. It has developed scars and I don't care. It is made of a piece of scrap pine and scrap maple. When it is dinged enough, I'll make another.

[Image: 1.jpg]


[Image: 2.jpg]

Cross cut saw a drawer side ...

[Image: 3.jpg]

[Image: 4.jpg]

[Image: 5.jpg]

Then shoot the end ...

[Image: 6.jpg]

[Image: 7.jpg]

Regards from Perth

Derek

RE: Shooter Conundrums - JohnnyEgo - 11-25-2019

I made my first shooting board this year, when I got my first actual bench plane. I am running a 5 1/2 jack plane, and am generally pleased with the results. It works quite well, and I am getting good enough with it in practice to where I can see how a dedicated shooter like the 51 would have it's advantages. At some point when I have the disposable income not dedicated to other things on the priorities list, I plan to purchase the Veritas 51. But in the more immediate term, I plan to make an inclined shooting board such as what Derek pictured above.

[Image: vindesk60.JPG]