+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: WTB - small chunk of wide thick walnut (/showthread.php?tid=7353254)
Pages:
1
2
WTB - small chunk of wide thick walnut - mound - 03-02-2020
Hi All,
Does anybody have a chunk of walnut they could sell me, 2.25" thick (min) x 14" wide (or two at 7” wide) with vertical or rift-sawn end-grain?
It only needs to be 2-3 inches in “length” and it’s the end-grain specifically I need it for to act as the ends of a “slab” I’m making using 3 layers of MDF veneered with 1/16” quarter sawn walnut. I want to make the ends of this fake "slab" look like the end-grain of a real quarter-sawn slab without a bunch of glue-lines and mis-matched grain.
Thanks!
-Paul
RE: WTB - small chunk of wide thick walnut - Arlin Eastman - 03-02-2020
I will look in my cut offs to see what I have. You said 2.25 minimum correct??
RE: WTB - small chunk of wide thick walnut - mound - 03-02-2020
(03-02-2020, 11:19 AM)Arlin Eastman Wrote: I will look in my cut offs to see what I have. You said 2.25 minimum correct??
correct! (to cover 3 layers of 3/4" MDF). Thanks!
RE: WTB - small chunk of wide thick walnut - museumguy - 03-02-2020
How soon do you need it? I may have some down in Md but not sure when I will get back down.
RE: WTB - small chunk of wide thick walnut - mound - 03-02-2020
(03-02-2020, 04:32 PM)museumguy Wrote: How soon do you need it? I may have some down in Md but not sure when I will get back down.
not for a few weeks at the very least. just prepping for a new project and putting the feelers out since I've not been able to find something yet.
RE: WTB - small chunk of wide thick walnut - museumguy - 03-02-2020
If the previous offers don't pan out, let me know. I'll let you know what I find when I head back to the old homestead.
RE: WTB - small chunk of wide thick walnut - Stwood_ - 03-02-2020
I'll look in my stash
RE: WTB - small chunk of wide thick walnut - Arlin Eastman - 03-03-2020
Sorry mine are only 2 1/8 at the most.
RE: WTB - small chunk of wide thick walnut - mound - 03-03-2020
(03-03-2020, 12:22 PM)Arlin Eastman Wrote: Sorry mine are only 2 1/8 at the most.
thanks for checking!
RE: WTB - small chunk of wide thick walnut - Stwood_ - 03-03-2020
Yes I've got some but going to take some doin to get it on the saw to cut the end off to ck the grain pattern.
It's 4x9x8'
I'll see if I can get that done today.