Treated decking finishing - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Treated decking finishing (/showthread.php?tid=7353563) |
Treated decking finishing - Bill Bob - 03-15-2020 Replaced several 2x6 treated boards on decking. Moisture reading was 36.7%, so at what moisture level can I apply the finish? What screw head seems to be best for decking boards? Square, Starr or? Regards, Bill RE: Treated decking finishing - Phil S. - 03-15-2020 I've used square drive and Torx 3-1/2" stainless screws and much prefer the Torx. Phil RE: Treated decking finishing - Bill Bob - 03-16-2020 (03-15-2020, 10:28 PM)Phil S. Wrote: I've used square drive and Torx 3-1/2" stainless screws and much prefer the Torx. Thanks Bill |