Treated decking finishing
#4
  
Replaced several 2x6 treated boards on decking.  Moisture reading was 36.7%, so at what moisture level can I apply the finish?  What screw head seems to be best for decking boards?  Square, Starr or?
Regards,
Bill
Reply
#5
  Re: Treated decking finishing by Bill Bob (Replaced several 2x6...)
I've used square drive and Torx 3-1/2" stainless screws and much prefer the Torx.

Phil
Reply
#6
  Re: RE: Treated decking finishing by Phil S. (I've used square dri...)
(03-15-2020, 11:28 PM)Phil S. Wrote: I've used square drive and Torx 3-1/2" stainless screws and much prefer the Torx.

Phil

Thanks
Bill
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)