Caster Source? - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Caster Source? (/showthread.php?tid=7357637) |
Caster Source? - jcredding - 09-07-2020 Anyone have a good source for 3" swivel locking casters that don't cost a bunch? I need them for some carts, and the total load might be 200 - 300 pounds. Years ago I bought a bunch from Hartville Tool but they don't seem to have them any longer (or at least my pitiful search didn't locate them. I can try some Amazon generics, but thought I would check here to see if anyone has a particular type they could recommend. RE: Caster Source? - tablesawtom - 09-07-2020 (09-07-2020, 04:02 PM)jcredding Wrote: Anyone have a good source for 3" swivel locking casters that don't cost a bunch? I need them for some carts, and the total load might be 200 - 300 pounds. Years ago I bought a bunch from Hartville Tool but they don't seem to have them any longer (or at least my pitiful search didn't locate them. I can try some Amazon generics, but thought I would check here to see if anyone has a particular type they could recommend. Try Home Depot. I bought a set of four. Type in swivel caster and look for Model 17208 I bought them and I am impressed with mine although the price has gone up about $5 sine I last bought. I had them shipped to my house and got them a lot faster than expected. Tom RE: Caster Source? - Gary G™ - 09-07-2020 Best value (price and quality) I got was from Amazon RE: Caster Source? - Woodshop - 09-07-2020 amazon 4 pack locking casters I also found the best casters with locks on amazon RE: Caster Source? - jcredding - 09-07-2020 Thanks - and thanks for the link. I’ll order a few sets. RE: Caster Source? - gad5264 - 09-08-2020 I have all Kreg casters on my mobile tools in the shop and I love them. RE: Caster Source? - Cooler - 09-08-2020 I've had good luck with Harbor Freight for casters. $4.19 each; 125 pound rated per caster. With four casters that is a total of 500 pounds. https://www.harborfreight.com/material-handling/tires-casters/swivel-casters/3-inch-x-7-8-eighth-inch-rubber-swivel-caster-66360.html Note: I corrected the link address. RE: Caster Source? - chips ahoy - 09-08-2020 Try Lee Valley,they usually have a good variety. Mel RE: Caster Source? - Gary G™ - 09-08-2020 I got these off Amazon POWERTEC 17208 3-Inch Swivel Double Lock Polyurethane Plate Caster Gray, 4-Pack RE: Caster Source? - museumguy - 09-08-2020 https://www.casterdepot.com/ great selection and a helpful staff |