+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: cedar for window trim? (/showthread.php?tid=7357798)
Pages:
1
2
cedar for window trim? - overland - 09-17-2020
I'm in need of advice. The interior trim on the windows in my daughters room is deteriorating--it's on the north side and is subject to condensation. Some may just need refinishing, but some may need to be replaced. I was thinking of using cedar because it's rot resistant. But of course there's the smell. That may dissipate, however. Also, my local menards, etc., have cedar from different sources, some quite red, but other boards, such as that used for decking, a little milder in color. Maybe that would work.
Any guidance would be appreciated.
RE: cedar for window trim? - Cooler - 09-17-2020
Cedar absolutely glows with a glossy clear finish. You will be impressed. But I find it easily splits.
If you are going to paint it, I would suggest the resin trim. It will never rot. You do need to use 100% acrylic primer for good adhesion, but it takes paint well.
Also, Lowes and Home Depot offer solid surface material for that purpose. (the same stuff used for counter tops. But at over $300.00 per window, a bit pricey.
https://www.lowes.com/pl/Solid-surface-Window-trim-kit--Shower-parts-accessories-Showers-shower-doors-Bathroom/4294648509?refinement=4294798793,4294730100
RE: cedar for window trim? - Admiral - 09-17-2020
Cypress was often used in the past for problematic rot issues, especially exterior trim work. It's an option - although generally sold 4/4 rough, so you'd have to joint and plane it.
RE: cedar for window trim? - overland - 09-17-2020
Is there an advantage to using cypress over cedar? I'm not familiar with it. Plus, where the heck do I get it? (I'm in Chicago.)
RE: cedar for window trim? - R Clark - 09-17-2020
Is there any way to fix the condensation issue first? Do that, and then the wood species questions might go away.
If the trim is rotting, I think there are going to be other issues that you find when you remove that trim.
By smell, I think you mean from the deteriorating trim? Or the smell of cedar? The cedar smell will be covered after you put a finish coating on it.
RE: cedar for window trim? - Admiral - 09-17-2020
(09-17-2020, 09:33 AM)overland Wrote: Is there an advantage to using cypress over cedar? I'm not familiar with it. Plus, where the heck do I get it? (I'm in Chicago.)
https://www.walllumber.com/soft.asp
Shipping would cost, but 4/4 at $3.25 bd/ft ain't bad.
If the UPS bundle sizes would work for you, that's not a bad way to go either....
https://www.walllumber.com/lum.asp
RE: cedar for window trim? - museumguy - 09-17-2020
Is the profile a basic one? The reason I ask, we made all kinds of profiles using PVC through our molder. Just a thought, that stuff never rots and can be painted.
RE: cedar for window trim? - Bibliophile 13 - 09-18-2020
I would opt for cypress over cedar. Cypress paints better, typically has fewer knots, and doesn't split as easily--just much easier to work with overall. Plus, with cedar you have to use only the heartwood if you want rot-resistance. That's true with cypress, too, but in cypress the sapwood is normally a much smaller percentage of the log than in cedar.
RE: cedar for window trim? - LarryK - 09-19-2020
(09-17-2020, 09:02 AM)overland Wrote: I'm in need of advice. The interior trim on the windows in my daughters room is deteriorating--it's on the north side and is subject to condensation. Some may just need refinishing, but some may need to be replaced. I was thinking of using cedar because it's rot resistant. But of course there's the smell. That may dissipate, however. Also, my local menards, etc., have cedar from different sources, some quite red, but other boards, such as that used for decking, a little milder in color. Maybe that would work.
Any guidance would be appreciated.
You can get PVC trim in a variety of profiles. It takes paint too
RE: cedar for window trim? - Gary G™ - 09-19-2020
Sierra Forest Products in Chicago says they have Cypress.
It’s a beautiful wood and easy to work albeit very soft.
If you can’t keep the area dry—PVC is a great option.