Posts: 951
Threads: 0
Joined: Mar 2007
I'm in need of advice. The interior trim on the windows in my daughters room is deteriorating--it's on the north side and is subject to condensation. Some may just need refinishing, but some may need to be replaced. I was thinking of using cedar because it's rot resistant. But of course there's the smell. That may dissipate, however. Also, my local menards, etc., have cedar from different sources, some quite red, but other boards, such as that used for decking, a little milder in color. Maybe that would work.
Any guidance would be appreciated.
Posts: 7,421
Threads: 1
Joined: Sep 2005
Cedar absolutely glows with a glossy clear finish. You will be impressed. But I find it easily splits.
If you are going to paint it, I would suggest the resin trim. It will never rot. You do need to use 100% acrylic primer for good adhesion, but it takes paint well.
Also, Lowes and Home Depot offer solid surface material for that purpose. (the same stuff used for counter tops. But at over $300.00 per window, a bit pricey.
https://www.lowes.com/pl/Solid-surface-W...4294730100
No animals were injured or killed in the production of this post.
Posts: 13,405
Threads: 4
Joined: Jun 2007
Location: New Jersey
Cypress was often used in the past for problematic rot issues, especially exterior trim work. It's an option - although generally sold 4/4 rough, so you'd have to joint and plane it.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 951
Threads: 0
Joined: Mar 2007
09-17-2020, 09:33 AM
(This post was last modified: 09-17-2020, 09:51 AM by overland.)
Is there an advantage to using cypress over cedar? I'm not familiar with it. Plus, where the heck do I get it? (I'm in Chicago.)
Posts: 8,236
Threads: 1
Joined: Mar 2000
Is there any way to fix the condensation issue first? Do that, and then the wood species questions might go away.
If the trim is rotting, I think there are going to be other issues that you find when you remove that trim.
By smell, I think you mean from the deteriorating trim? Or the smell of cedar? The cedar smell will be covered after you put a finish coating on it.
Posts: 13,405
Threads: 4
Joined: Jun 2007
Location: New Jersey
(09-17-2020, 09:33 AM)overland Wrote: Is there an advantage to using cypress over cedar? I'm not familiar with it. Plus, where the heck do I get it? (I'm in Chicago.)
https://www.walllumber.com/soft.asp
Shipping would cost, but 4/4 at $3.25 bd/ft ain't bad.
If the UPS bundle sizes would work for you, that's not a bad way to go either....
https://www.walllumber.com/lum.asp
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 2,066
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Is the profile a basic one? The reason I ask, we made all kinds of profiles using PVC through our molder. Just a thought, that stuff never rots and can be painted.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
I would opt for cypress over cedar. Cypress paints better, typically has fewer knots, and doesn't split as easily--just much easier to work with overall. Plus, with cedar you have to use only the heartwood if you want rot-resistance. That's true with cypress, too, but in cypress the sapwood is normally a much smaller percentage of the log than in cedar.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at The Literary Workshop
Posts: 787
Threads: 0
Joined: Feb 2010
(09-17-2020, 09:02 AM)overland Wrote: I'm in need of advice. The interior trim on the windows in my daughters room is deteriorating--it's on the north side and is subject to condensation. Some may just need refinishing, but some may need to be replaced. I was thinking of using cedar because it's rot resistant. But of course there's the smell. That may dissipate, however. Also, my local menards, etc., have cedar from different sources, some quite red, but other boards, such as that used for decking, a little milder in color. Maybe that would work.
Any guidance would be appreciated.
You can get PVC trim in a variety of profiles. It takes paint too
Everybody blamed his old man for makin him mean as a snake. When Amos Moses was a boy his daddy would use him for alligator bait!
-Jerry Reed
Larry
Posts: 21,597
Threads: 0
Joined: Oct 2003
Sierra Forest Products in Chicago says they have Cypress.
It’s a beautiful wood and easy to work albeit very soft.
If you can’t keep the area dry—PVC is a great option.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
|