+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Bench Grinder Wheel Flanges (/showthread.php?tid=7361725)
Bench Grinder Wheel Flanges - Philip1231 - 03-22-2021
Having a difficult time sourcing replacement wheel flanges for my bench grinder: need 1/2" ID (arbor) but want oversized OD. Most standard flanges that are 1/2" ID come with OD of slightly over 2". I'd like to be at least 2-3/4" OD. Running a 3M Scotch-Brite Radial Bristle Brush Wheel and having some imbalance issues.
[attachment=34280]
RE: Bench Grinder Wheel Flanges - Bob Vaughan - 03-23-2021
The standard Baldor HA6096A01SP flange seems like it will fit the bill.
RE: Bench Grinder Wheel Flanges - Philip1231 - 03-24-2021
Thanks for that Bob: could be just the ticket!
(03-23-2021, 08:20 AM)Bob Vaughan Wrote: The standard Baldor HA6096A01SP flange seems like it will fit the bill.