Posts: 2,348
Threads: 0
Joined: Dec 2005
Having a difficult time sourcing replacement wheel flanges for my bench grinder: need 1/2" ID (arbor) but want oversized OD. Most standard flanges that are 1/2" ID come with OD of slightly over 2". I'd like to be at least 2-3/4" OD. Running a 3M Scotch-Brite Radial Bristle Brush Wheel and having some imbalance issues.
Posts: 1,223
Threads: 0
Joined: Sep 2007
The standard Baldor HA6096A01SP flange seems like it will fit the bill.
Posts: 2,348
Threads: 0
Joined: Dec 2005
Thanks for that Bob: could be just the ticket!
(03-23-2021, 08:20 AM)Bob Vaughan Wrote: The standard Baldor HA6096A01SP flange seems like it will fit the bill.
