Project Aftermath - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Project Aftermath (/showthread.php?tid=7367666) Pages:
1
2
|
RE: Project Aftermath - bandit571 - 02-17-2022 Should have been titled " A Project's Aftermath" Where ALL the toys..er...TOOLS are put away, until the next Project comes along. RE: Project Aftermath - bandit571 - 02-17-2022 I suppose I could organize this area just a bit better? [attachment=40748] No. 3s and No. 4s that were evicted out of the plane till...to allow the bigger ones a parking space.. [attachment=40749] There is both a Stanley No. 8, and a No.8c....Along with a No.7 and a no.7c..and a No. 6 and a No. 6c....and a mob of jack planes... Have bought a 1 x 8 x 6' pine board, today....goal is to cut it up to make a few shelves....Along with a pack of #6 3/4" screws...because...although Wal E World does sell the brackets..... [attachment=40750] For about $0.98 each...they don't come with any screws, nor does Wallmart SELL any that fit.....had to go across the street to Lowes, today... BTW: THIS followed me home, today... [attachment=40751] [attachment=40752] Millers Falls No. 8, type 2....$26.81, counting sales tax... RE: Project Aftermath - bandit571 - 02-18-2022 Ok...managed to get to the shop, today...Needed to cut that 1 x 8 down into a couple shelves... Squared a line about 24" from the end of the board. [attachment=40763] ..needed a saw to do the cutting, though....couldn't get to the Ready-use saws...so [attachment=40764] I think this should do the trick... [attachment=40765] Then add 2 brackets... [attachment=40766] Had to move a few planes out of the way... [attachment=40767] Then, re-stash a few more planes. Now I can glance in, and see which plane I need to use. There IS single No.6c in there, a couple 5-1/2s Maybe a #5.....there rest are Smoothers. And, the WR #62. Moved 2 marking gauges over to sit with 2 more.. [attachment=40768] Then cut a second shelf for the Cased planes to sit on... [attachment=40769] Had more trouble with what was supposed to be #2 phillips tips....that would NOT drive any screws...tossed a few into the trash. May just go out and re-stock the tips. Stay tuned...there is that area right in front of the Plane Til that needs some work.... RE: Project Aftermath - bandit571 - 02-19-2022 The area that needs cleaned up/out... [attachment=40788] Yeah...have to think on this a bit...errands to run, today. Not walking all that well...it can wait a day, or 3....no rush at the moment... Stay tuned... RE: Project Aftermath - bandit571 - 02-21-2022 Couple of Updates: End of the bench is now cleared off.. [attachment=40813] Except now...there are two storage boxes down there.. [attachment=40814] Front one for small tools.. [attachment=40815] And the other is filled with hardware and such.. [attachment=40816] Have added a second shelf inside the Tool Cabinet.. [attachment=40817] There is now 9 saws inside... [attachment=40818] About time to say this is "Open for Business"? [attachment=40819] That MIGHT be it for this rehab...ya never know.. RE: Project Aftermath - stav - 02-22-2022 Looks like you still need a little room for growth in there. Looking good though. Nice to see an organized tool area. Mine is mostly piles. RE: Project Aftermath - bandit571 - 02-24-2022 Area right in front of the Tool Cabinet...has been cleared off.. [attachment=40858] Might need something there, to prevent it from re-filling up again...we'll see... |