+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: The In-between Projects phase.. (/showthread.php?tid=7377157)
The In-between Projects phase.. - bandit571 - 11-05-2024
Project is completed...now what. Shop needs a good, thorough straightening up...tools to sharpen, tools to put away....and find out what is buried under the mess..
Maybe a week's worth of work?
Meantime? Will be watching/reading other people's Build Threads.....Get busy..
RE: The In-between Projects phase.. - bandit571 - 11-12-2024
Cleaned the bench..
[attachment=53009]
Machines put away, where they belong..
[attachment=53010]
area behind the Mitersaw has been cleaned up...found a good saw, too...
[attachment=53011]
Space has been cleaned up, swept up...weather permitting, that full trash can will get burned in the Fire Pit...
[attachment=53012]
Router Table has been stowed away...
[attachment=53013]
Found this in a pile of dirt...bit was broken off, rusted up.....cleaned the rust, freed up the internals...replaced the broken drill bit...
As for the saw I found?
[attachment=53014]
Etch was still readable....This is a Disston No. D8 ( no hyphen, 8 is inside of the D) 22" long Panel saw, 11 ppi.
[attachment=53015]
And that was the only defect I found...
Went through all the leftovers from the last Project....cut out the worst sections, resaw the remaining pieces to 1/2" thick...will be starting up a new "Build Along" thread...soon...
RE: The In-between Projects phase.. - stav - 11-13-2024
Its a good day when you find a random saw you didn't know about in your shop.