The In-between Projects phase..
#4
Project is completed...now what.   Shop needs a good, thorough straightening up...tools to sharpen, tools to put away....and find out what is buried under the mess..

Maybe a week's worth of work?  

Meantime?    Will be watching/reading other people's Build Threads.....Get busy..
Show me a picture, I'll build a project from that
Reply
#5
Cleaned the bench..
   
Machines put away, where they belong..
   
area behind the Mitersaw has been cleaned up...found a good saw, too...
   
Space has been cleaned up, swept up...weather permitting, that full trash can will get burned in the Fire Pit...
   
Router Table has been stowed away...
   
Found this in a pile of dirt...bit was broken off, rusted up.....cleaned the rust, freed up the internals...replaced the broken drill bit...
As for the saw I found?
   
Etch was still readable....This is a Disston No. D8 ( no hyphen, 8 is inside of the D) 22" long Panel saw, 11 ppi.
   
And that was the only defect I found...

Went through all the leftovers from the last Project....cut out the worst sections, resaw the remaining pieces to 1/2" thick...will be starting up a new "Build Along" thread...soon...
Show me a picture, I'll build a project from that
Reply
#6
Its a good day when you find a random saw you didn't know about in your shop.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.