Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
to put handles on a few knives I have.
So what kind of rivets do you use and where do you buy them?
Also a link Please.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 320
Threads: 0
Joined: Dec 2013
Hey Arlin,
You can just get some brass rod stock, drill through, add a section of brass rod then peen the ends. I don't believe you need special rivits.
Doug
Posts: 46,101
Threads: 6
Joined: Sep 2000
ask in hand tools too.
“The windows are open and I'm wearing pants.”
- Fire Wood
Posts: 5,891
Threads: 0
Joined: Feb 2002
Arlin Eastman said:
to put handles on a few knives I have.
So what kind of rivets do you use and where do you buy them?
Also a link Please.
Arlin
I have used
These before. They are called corby bolts. Basically like a cap screw except there is enough material to file away the slot after tightening to make them look like rivets.
Steve K
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Shop Dad said:
Hey Arlin,
You can just get some brass rod stock, drill through, add a section of brass rod then peen the ends. I don't believe you need special rivits.
Doug
Doug
I did that a lot in the military if it was not for Aircraft repair, but I do not know if this would damage or split the wood.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Steve
That is a good idea and kind of like the fasteners we used in the military on Air Craft called Stumpbolts and a few other fasteners.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 771
Threads: 0
Joined: Jan 2011
Location: Cincinnati
I've used these to make Fibonacci calipers. One piece fits into the other, they go in, but don't come out. You would want to countersink them into a knife handle.
Lee Valley brass rivets
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Thank you Hairy. I was just given that link when I posted it in hand tools like was suggested.
I think they are just perfect for the job and any other future knives too.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 643
Threads: 0
Joined: Jul 2011
Location: Centralia, WA, USA
Arlin I just did a quick search for knife handle rivets. There's a ton of suppliers out there.
Here's one link of many:
http://www.knifemaking.com/category-s/75.htmIt looks like they have a wide variety of styles and should have something that will work for you.
Rodney
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Thank you.
I posted this in hand tools also and they had this link there.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
