Posts: 2,201
Threads: 0
Joined: Dec 2006
I've got this Master Mechanic back saw that I bought twenty-something years ago. Yeah, it sucked!
It was also the first saw that I reshaped teeth and sharpened a few years back, and it actually cuts quite well. The problem, which I'm sure you can see, is the handle is very uncomfortable.
A search for saw handle templates brings up lots of stuff...what would be appropriate for this saw? It's got a 14" plate, and about 3 1/2" depth of cut.
Thanks!
David
Posts: 4,764
Threads: 0
Joined: Sep 2009
Location: The GA Lowcountry
---------------------------------------------------
When something has to be done, no one knows how to do it. When they "pay" you to do it, they become "experts".
Posts: 2,201
Threads: 0
Joined: Dec 2006
That's one of the sites I found...but how does one decide which to try.
Posts: 1,045
Threads: 0
Joined: Aug 2012
Location: In da U.P. of Michigan
Isaac Smith at
Blackburn Tools also has saw handle templates available online. He has even developed difference sizes of each handle style to fit large or small hands.
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
Yeah, there are a lot of choices, aren't there? I would start with the simpler Disston patterns for the length of saw you have. They're comfortable designs, and they're not too complicated to make.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 2,201
Threads: 0
Joined: Dec 2006
Thanks Dom...I'll give that a try.
Posts: 12,283
Threads: 0
Joined: Jun 2007
Location: Bucks County PA
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Posts: 2,201
Threads: 0
Joined: Dec 2006
Sorry to both of you! Guess I only looked at the color on the screen name, and didn't read.
