08-05-2019, 10:27 AM
Hi, I have two machine stands that need a new home. One is an old Delta and the other is a ShopSmith. Neither come with any of the original machines that came with them.
The ShopSmith has splayed legs and locking casters. The dimensions are
Top
12.75" deep
23.75" wide
36" tall
Bottom
18" deep
26" wide
The Delta is welded and has the spayed feet but the legs are straight up and down. Both shelves are the same size, but the top has some cutouts. The rust is all surface and should clean up nicely. The dimensions are
14" deep
27.5" wide
26.5" tall
Shipping will be a bit of a problem with these, but if you want to crate them, no problem. Both are in Orlando, FL. $30 each or make me an offer.
The ShopSmith has splayed legs and locking casters. The dimensions are
Top
12.75" deep
23.75" wide
36" tall
Bottom
18" deep
26" wide
The Delta is welded and has the spayed feet but the legs are straight up and down. Both shelves are the same size, but the top has some cutouts. The rust is all surface and should clean up nicely. The dimensions are
14" deep
27.5" wide
26.5" tall
Shipping will be a bit of a problem with these, but if you want to crate them, no problem. Both are in Orlando, FL. $30 each or make me an offer.