Posts: 4,912
Threads: 3
Joined: Apr 2009
I am remodeling my kitchen and the flooring guys removed the baseboard to install the new floor. I need to reinstall the baseboard and can't figure out how to nail behind the cast iron radiator. Any suggestions?
Currently a smarta$$ but hoping to one day graduate to wisea$$
Posts: 4,685
Threads: 0
Joined: Jan 2007
If you are able to get a long driver bit and a narrow head trim screw back there I don’t think anybody would ever know.
Any free advice given is worth double price paid.
Posts: 24,070
Threads: 0
Joined: Jan 2004
Would construction adhesive work?
Matt
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason.
-Jack Handy
Posts: 9,556
Threads: 0
Joined: Jan 2005
Location: Orlando FL
Would a pin punch get you to where you need to be? I'd put some double sided tape on it and stick the nail to it, then feed through the radiator and then hammer it in. Probably not the most elegant solution but it should allow you to get that nail in there. Or use a screw with a long driver.
Posts: 2,213
Threads: 1
Joined: Sep 2003
Location: Maryland
(11 hours ago)Woodenfish Wrote: If you are able to get a long driver bit and a narrow head trim screw back there I don’t think anybody would ever know.
That's what I'd do.
