Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
I'm making wedged tenons, and need 4 wedges. I've done this before, but never so small: 1/4" tenon thickness, and 3/8" length. Any thoughts on best methods?
Thanks!
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 29,152
Threads: 1
Joined: Aug 2002
bandsaw cut them from 4/4 about a third longer than you need
then split them in two pieces
drive them home remove the excess
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 21,882
Threads: 0
Joined: Oct 2003
Handsaw, bandsaw, or even a scroll saw.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 2,115
Threads: 0
Joined: Apr 2005
If you have a tenon jig, tilt it and cut them on the TS.
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
Thanks, everyone.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
