CA glue question

[Angus]

Sorry folks, I know it's been asked before but I lost a lot of my bookmarks. What's the preferred source for CA glue?

[Steve K]

I use starbond. The biggest reason is our club orders it a couple times a year and we order enough it ships free. Still, even with shipping it's a good product and reasonably priced. They also have a big selection in viscosity and color choices.

[Arlin Eastman]

Yep Steve has it right and it only cost $30 for a 16oz bottle and they send you 4 smaller bottles to fill and the thin drip nozzles too.

http://www.starbond.com/

You have to call to order since they do not sell it on their site.

Good to hear from you again my friend.

Arlin

[Angus]

Thanks guys, I hadn't considered it before but that black CA is going to make my life a whole lot easier

[Woodshop]

I still use the E-Z Bond Wooden wonders sold. You can still get it here.
http://www.exoticblanks.com/Glues-and-Epoxies/

I don't use much CA, A bottle will last me years. I keep it in the refrigerator.
will try the Starbond when my bottle runs out

[Arlin Eastman]

Angus

I think including Black they have pink and 2 other colors. I also wanted to get black so it will show in-between the cracks or I should say the seams.

I think it would really highlight the wood like that.

Arlin

[Angus]

be prepared Arlin, the black is double the cost of clear. A 16 oz bottle of black is $60.00

[Dusty Workshop]

Woodshop said:

---

I still use the E-Z Bond Wooden wonders sold. You can still get it here.
http://www.exoticblanks.com/Glues-and-Epoxies/

I don't use much CA, A bottle will last me years. I keep it in the refrigerator.
will try the Starbond when my bottle runs out

---

I door see this product on that website?
I searched "ez bond" and it only found CA products.

[Arlin Eastman]

Yah

I forgot about that but it is still cheaper then by the 2 or 3 oz bottles from others.
I would use Medium CA clue and add black India ink to change it instead.

Arlin

[Arlin Eastman]

Don

The company you mentioned there thin CA viscosity is only at 50 cps but Starbond is 2 or 3 cps which is soooo much better at penetrating especially if you use inlayed metals or other things.

http://www.exoticblanks.com/E-Z-Bond-16-...Label.html

To this

http://www.starbond.com/

Plus it comes with 4 small plastic bottles with lids and the small flexible tips that allow very good delivery

Arlin