Posts: 1,028
Threads: 0
Joined: Apr 2011
So the frame to my back door window is cracked and needs to be replaced.
I do not need a new door, nor a window. I just need a new frame for the window.
A Google search results in multiple useless leads.
Where can I get a new frame for this window?
Ray
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
If you can find the manufacturer of the door they may be able to help.
Posts: 29,152
Threads: 1
Joined: Aug 2002
take your pic and accurate measurements of the window to any reputable lumberyard they can set you up with a new unit and the frame
Sadly you are not going to have much luck getting the frame without the IG unit AFAIK this is the only option
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
The frame is part of the window. Those units usually run around $70. Measure it pick up a new one and swap it out. It's all glued together.
Posts: 1,028
Threads: 0
Joined: Apr 2011
Actually, the two halves of this frame are screwed together.
I was hoping to find an on-line source, but I guess I'll take my chances at the box stores n such.
Thanks
Ray
Posts: 1,103
Threads: 0
Joined: Oct 2000
Posts: 10,771
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
Go to a door shop.....IIRC the window sizes are somewhat standard.
Ed
Posts: 29,152
Threads: 1
Joined: Aug 2002
Quote:
I guess I'll take my chances at the box stores n such
\you might note I mentioned a reputable lumberyard
I would not waste one second of time at a borg
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 1,028
Threads: 0
Joined: Apr 2011
point taken - insofar as lumber yards go in the Cincinnati that may be Hyde Park Lumber over the box stores.
Ray
Posts: 13,266
Threads: 0
Joined: Aug 2001
Location: Royersford Pa.
A window frame like that would make a nice wood working project.
Twinn
Will post for food.
