|
formica on bull nose
|
10-17-2016, 05:44 PM
Done this a lot in cabinet shops. It requires a post former which heats the laminate and forms it while hot. Honestly, you are highly unlikely to get good results in a home shop.
You can buy the counter formed, or use a wood edge. 
10-19-2016, 05:22 PM
Flat laminate going around a radius.
https://www.youtube.com/watch?v=Qjv33xGRXxs Beveled edge https://www.youtube.com/watch?v=DkHemVAkhTU Bullnose probably is going to be a fabricator only function simply because the toys involved are not going to be cost effective for a DIY project. But you can call the friendly folks at Formica, and ask  Customer Service and Technical Services: 1-800-FORMICA™ (367-6422)
Worst thing they can do is cook ya and eat ya
 GW |
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
