|
Jet 1642, PM 3520 and PM4224 owners?
|
12-07-2016, 04:17 PM
I'd like people that own these to go measure the span between the legs. That is the short distance.
I'm looking at using the Lift, Lock and Roll mobile system on another lathe and need some dimensions to compare. TTFN
Making sawdust mostly, sometimes I get something else, but that's more accident then design.
12-07-2016, 06:28 PM
The overall width of each set of legs on my 3520B is 24". The gap between each foot on each set of legs (which I think is what you are asking for) is just shy of 18".
12-07-2016, 06:35 PM
(This post was last modified: 12-07-2016, 06:38 PM by Arlin Eastman.)
Ralph
I have the PM3520b and you really did not specify top or bottom So this is what I did Top of the short side inside 8 3/4 outside 9 3/4 Top long side Inside 38 1/4 Outside 501/2 Inside of the bottom is 22 7/8 Outside of the bottom is 24
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing. |
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
