Posts: 6,139
Threads: 1
Joined: Nov 2006
I will be experimenting with ebonizing wood in a few weeks once my supplies have arrived and I find some time. I searched WN and only found this
thread, which was very informative. I have my steel wool sitting in vinegar and I've ordered the Quebracho bark powder. The
Brian Boggs article was very well written and that's what I'm using as a guide.
I want to ebonize some substantial table legs for a large slab dining table. I'll be experimenting with poplar first, as this would provide a low cost option. I want to avoid using oak, I don't want the grain patterns. I've read cherry and walnut ebonize nicely due to the natural tannin content but that would add a lot of expense.
i'll update here with my results.
Posts: 2,003
Threads: 1
Joined: Aug 2016
People say they get good results from using straight India ink . Worth a try to see if it gives you the results you are looking for. The results of using of the options will vary greatly with the species of wood. Suggest using the same species of wood for the sample as the actual project. Roly
Posts: 3,390
Threads: 1
Joined: Jan 2002
This is what I use. Hobby Lobby sells it pretty dang cheap too. (I flipping hate that store) I've tried other methods but find this to give the deepest black while maintaining the character of the wood.
-Marc
Posts: 7,421
Threads: 1
Joined: Sep 2005
Michael's sells imitation India ink.
I don't shop at Hobby Lobby. I don't like their politics.
Amazon.com sells it too.
From Dick Blick:
http://www.dickblick.com/products/blick-...gLiO_D_BwE
This is more economical. I don't know if it is the same stuff, but if I had a big project I would consider trying this:
http://www.dickblick.com/products/speedb...BwE#photos
No animals were injured or killed in the production of this post.
Posts: 12,920
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
India ink works really well on most woods. Cheap, too, if you buy it in the quart size, or larger.
John
Posts: 22,328
Threads: 0
Joined: Dec 2005
Location: Oakdale, MN
(08-06-2017, 12:48 PM)Roly Wrote: People say they get good results from using straight India ink .
+1
Thats what I do. Just finished an urn Friday that I ebonized using that method. I wouldn't fool around with any other method.
Once Favre hangs it up though, it years of cellar dwelling for the Pack. (Geoff 12-18-07)
Posts: 206
Threads: 0
Joined: Dec 2008
Black hair dye works well.
