Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I see a Griz 1-1/2hp sitting there.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 70
Threads: 0
Joined: Feb 2017
Thanks for the advise. Lots to think about. Yes, small shaper. Grizzly 1.5. Working expanding top and building a base that keeps the weight of the feeder within the wheels when it’s swung out of position. I see growing out of it soon.
Posts: 3,535
Threads: 0
Joined: May 2005
Location: Greater Fort Collins Area, CO
either way, you've a feeder that will grow with you!
I really want one (or 2) for my bandsaw and separately for my shaper / jointer.
michael
Every day find time to appreciate life. It is far too short and 'things' happen. RIP Willem
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Wonder if Powermatic makes a single phase motor that would fit right on there?
Posts: 200
Threads: 0
Joined: Dec 2010
(12-03-2018, 03:32 PM)daddo Wrote: Wonder if Powermatic makes a single phase motor that would fit right on there?
The Powermatic is made by Comatic which makes feeders for almost all the companies except some of the Europeans. The 1ph motor will likely fit but the last time I priced one it was over $450 shipped, I used that as a sign to replace it with a DC Easy Feeder.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Yes. Probably wouldn't be cost effective
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 3,535
Threads: 0
Joined: May 2005
Location: Greater Fort Collins Area, CO
12-05-2018, 11:54 AM
(This post was last modified: 12-05-2018, 11:56 AM by MichaelS.)
(12-03-2018, 05:03 PM)Huxleywood Wrote: The Powermatic is made by Comatic which makes feeders for almost all the companies except some of the Europeans. The 1ph motor will likely fit but the last time I priced one it was over $450 shipped, I used that as a sign to replace it with a DC Easy Feeder.
my post didn't appear for some reason. Wanted to thank you for the DC feeder, I wasn't even aware of that style. I'd only ever seen or used the gear models. the variable option solves many of my challenges. Thanks!
Michael
Every day find time to appreciate life. It is far too short and 'things' happen. RIP Willem
