FS: Shaper spindles

[Jeff Holmquist]

I have three shaper spindles that I believe fit some, but not all, Delta shapers as well as others.  All components are in excellent condition.
 
- One 1” spindle with two nuts and three spacers.  No drawbar.
 
- Two ½” spindles, each with three nuts.  No drawbar.
 
- One set of four ½” spacers.
 
- The 1” set is $110.  The ½” sets are $45 each without spacers, or $60 for one ½” spindle plus spacer set.  Say, $195 for all items.  Prices don’t include shipping, but should be inexpensive.
 
Please see dimensions below.  Threading for drawbars is 3/8-24.  Let me know if you have questions.
 
Thanks for looking,
Jeff
Sierra eastside, CA