Posts: 249
Threads: 0
Joined: Sep 2004
03-28-2024, 01:43 PM
(This post was last modified: 03-28-2024, 01:45 PM by Bencuri.)
Not sure if it has been already posted, but if you ever wondered how to make these at home, now you can see the process:
Posts: 1,565
Threads: 0
Joined: Feb 2003
Dave Corinth is a good follow on YouTube. He also has some great videos about making totes. I also just found the 'Just Plane Fun' channel- I think the guys name is Mike Jenkins. He sells plane parts, etc. on his FB group Just Plane Fun the Parts Division.
Posts: 4,004
Threads: 0
Joined: Nov 2010
Might take a bigger mold for this one?
AMT No. 5-1/4 Junior Jack plane...base is solid cast brass
Going to need a lot of Brass..
A magnet will not stick to the base...it is solid Brass. 11" long, 2-1/4" wide...
Show me a picture, I'll build a project from that
Posts: 249
Threads: 0
Joined: Sep 2004
(03-29-2024, 07:27 PM)bandit571 Wrote: Might take a bigger mold for this one?
AMT No. 5-1/4 Junior Jack plane...base is solid cast brass
Going to need a lot of Brass..
A magnet will not stick to the base...it is solid Brass. 11" long, 2-1/4" wide...
You should try. Casting might be the easier part. It is not complicated to build that foundry. Machining would be the more difficult part for me. Buying all those milling bits.
