08-08-2016, 04:20 PM
For a miter, I would do the following:
Wipe with acetone
Skim coat both faces of the miters with TB.
Let it dry 5-10 minutes or even 15.
Then, glue both faces and clamp.
Let dry in clamps overnight.
IIWM, when dry, I'd add slipfeathers to the miters.
Wipe with acetone
Skim coat both faces of the miters with TB.
Let it dry 5-10 minutes or even 15.
Then, glue both faces and clamp.
Let dry in clamps overnight.
IIWM, when dry, I'd add slipfeathers to the miters.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.