Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
LIL I'm thinking that removing the trunnions, mounting them to the saw and then mounting the top will be easiest. With supports under it in case I deke right and the table jukes left.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Nothing wrong with doing it that way, except you'll have to do the major alignment instead of the minor.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(08-16-2017, 09:39 AM)Stwood_ Wrote: Nothing wrong with doing it that way, except you'll have to do the major alignment instead of the minor.
What would be involved? I know I'd have to get the table flat. Would I have to adjust it (more or less) square to the blade? What other alignment would be needed?
Thanks!
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 18,494
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Does it make sense to remove the trunions, and attach those to the saw, then place the table onto the trunions?
That would work on my (different make/model) saw, but don't know if it would work on yours.
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(08-16-2017, 10:16 AM)Aram Wrote: What would be involved? I know I'd have to get the table flat. Would I have to adjust it (more or less) square to the blade? What other alignment would be needed?
Thanks!
Had to go look at mine again. I have a MM-16 also.
There's 4 jack/attaching bolts holding the table on. You have a certain distance between the table and trunion plate. Looks to be 1/2" or so.
Maybe make some wood spacer blocks to fit in there. That will give you a guide to follow when you put the table back on maybe.
Then, level and resquare the table to the blade.
Maybe?
I'd go find some lifting help.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
