Posts: 2,738
Threads: 0
Joined: Dec 2005
Thanks! Yeah, got lucky with the grain. Legs are turned but the back spindles are just 3/4" dowels: I just turned tenons on the end (yeah its cheating, but I am not a turner so I need all the help I can get).
(04-22-2020, 06:05 AM)kwadams Wrote: Nicely done, Phil! Yeah the grain in the comb is gorgeous! Did you turn the legs and sticks or shape by hand?
It’s gonna look great in your house!
Kevin
Posts: 2,738
Threads: 0
Joined: Dec 2005
I used OSMO Polyx Oil and it did a nice job.
(04-21-2020, 08:08 PM)msweig Wrote: Looks good. Finishing mine might be my next project.
Posts: 2,738
Threads: 0
Joined: Dec 2005
Posts: 2,738
Threads: 0
Joined: Dec 2005
Thanks. As I mentioned above, the real test will be when its put to use at the sewing center.
(04-22-2020, 07:53 AM)stav Wrote: I love it. Very clean and well defined.
I'm also interested to hear how you like using it.
Posts: 2,738
Threads: 0
Joined: Dec 2005
That was sawn: I have never done steam bending and i was already blazing so many new trails on this project, I didn't want to add a steam explosion to the list
(04-22-2020, 08:27 AM)Scoony Wrote: Turned out great. Did you steam bend the crest or saw it to shape?
