Thinning lacquer
#11
I have watco lacquer brand new can I was attempting to thin it so I could wipe it on.when I added mineral sports it turn to a slimy,suspended cloud. After several days it appears to have disolved. Is it ok to use? I have always thinned lacquer to speed dry time and make it wipeable. It has been several years since I have used lacquer did they change the formula or something
Reply
#12
I've never used MS, only lacquer thinner. I'm thinking you just used the wrong solvent, no idea what effect that may have. On the other hand, I haven't bought any lacquer in a while (I always used Watco) so I suppose it's possible they changed something. If they did the correct thinner should be on the label.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Reply
#13
Lacquer should be thinned with lacquer thinner, not mineral spirits.
that's two completely different chemicals.
I wouldn't trust it mixed together.
Reply
#14
(02-20-2021, 09:18 AM)jcclark Wrote: Lacquer should be thinned with lacquer thinner, not mineral spirits.
that's two completely different chemicals.
I wouldn't trust it mixed together.

Agreed, use lacquer retarder not MS.  I have a feeling the MS separated out of the lacquer and is in the bottom of the can.   If you mixed the whole can throw it out and start over.  I would not try to use on a project.    Roly
Reply
#15
Ok thanks,is lacquer thinner different than paint thinner? I only mixed a small batch so if need to get lacquer thinner I will
Reply
#16
(02-20-2021, 09:59 AM)chizlr40 Wrote: Ok thanks,is lacquer thinner different than paint thinner? I only mixed a small batch so if need to get lacquer thinner I will

A huge difference. Lacquer thinner is a cocktail of solvents, mostly the more volatile ones like acetone, toluene, and a long list of other stuff.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Reply
#17
(02-20-2021, 09:18 AM)jcclark Wrote: Lacquer should be thinned with lacquer thinner, not mineral spirits.
that's two completely different chemicals.
I wouldn't trust it mixed together.

+1
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#18
I doubt that you can build any surface thickness by wiping on lacquer.  It is a "hot" solvent-based finish.  I suspect that after the first coat any additional coats will wipe away about as much finish as it adds. 

In any case, I would do some Internet research on the subject before trying it out on a nice project.

I have wipe oil-based poly successfully and I have a "hybrid" wipe/brush technique that builds a bit faster.  I have also wiped on Watco Danish oil.  It looks nice but does not seem very durable.  I used it on a walking cane and I reapply every few months.
No animals were injured or killed in the production of this post.
Reply
#19
Brush-on lacquer is available, but I never tried brushing. I always spray lacquer.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#20
I used brush-on Deft lacquer for a high school woodshop project and I thought it turned out great.  You can still buy Deft brush on.  I tried it more recently for drawers because of the very quick dry times.  But the smell was offensive. 

I then used Sealcoat for the same reason.  It smelled for a bit while applying, but not for long. 

Then I went with the "Triple-thick Varathane".  One coat brush on did the trick.

Now I spray with water-based poly.  I will probably stick with this option.  It is fast, and does not smell bad, and dries quickly.

The Deft lacquer can be scuff sanded and you can get a good finish build.  You can also buff to a very high gloss.  You can do the same with shellac.  I'm not sure which is shinier or which is more durable.
No animals were injured or killed in the production of this post.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.