Posts: 12,617
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I always spray both sides.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Both sides here as well. I wonder if Super Soft 2 isn't just laundry soap, diluted in water?
Worst thing they can do is cook ya and eat ya
GW
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
Last little bit of veneering I did, it wasn't very wrinkled, more like wavy. Just wet it down (both sides), pressed it between some boards using unprinted newsprint to soak up the water. Then used it ASAP.
Worked fine and at last check, no problems. Just making the panels for the lid of a box, so pretty small stuff.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Posts: 10,732
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
(11-15-2016, 05:00 PM)Steve N Wrote: Both sides here as well. I wonder if Super Soft 2 isn't just laundry soap, diluted in water?
You can also use fabric softener diluted with water. I think I might have learned that from David Marks. Can't remember.
Still Learning,
Allan Hill
Posts: 5,657
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
you used to be able to do fabric softener, but they seem to have changed the formulation and I'm not sure it works any more.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Looks like they fixed the words beginning in F, turning into fudge thing, somewhere between Allan, and Eric
Carry on.
Allan when I typed laundry soap, I was thinking about fabric softener, or fudge
Worst thing they can do is cook ya and eat ya
GW
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Is this the fudge thread? I'm hungry
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 1,422
Threads: 0
Joined: Dec 2004
Thank you for the replies. This is a large 52" diameter table top with a star burst pattern. I am not comfortable using a home brew softener for this project. Joe's stuff might just be another home brew but at least it has been tested.
Posts: 8
Threads: 0
Joined: Aug 2016
11-23-2016, 03:19 PM
(This post was last modified: 11-23-2016, 03:20 PM by Dan_.)
I soak both sides. Then place nylon screen on both sides with 3 sheets of news paper on top of the screens. Put in the vacuum press and change the news paper twice a day until dry (about 3 days).
Here is the Formula for flatting from the Center of Furniture Craftsmanship, Maine. I us it all the time and it never failed me.
2 parts white or yellow glue
3 parts water
1 part glycerin (drug store) in the laxative dept.
1 part denatured alcohol
