Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
03-04-2017, 01:42 PM
(This post was last modified: 03-04-2017, 01:43 PM by Arlin Eastman.)
Michael
This is the first time I have seen these and I am thinking many other turners hear as well have not seen them.
For me there are a lot cheaper ones that I like better then the ones you shown and thinking they are used for a single purpose.
Arlin
Also you might want to post this in the turning forum also.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 22
Threads: 0
Joined: Sep 2009
They are centers designed esp for flute makers. The different sizes would fit the different bore sizes a flute maker makes. If anyone knows of a similar center please send me a link or some info.
Posts: 14,849
Threads: 10
Joined: Jan 2010
Location: southeastern VA
The
Best Wood Tools folks make a small faceplate that screws onto the OneWay live center.
You can use that to make your own jam chuck(s) for the inside of the flute.
The system works well and gives you lots of options.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 22
Threads: 0
Joined: Sep 2009
Ill check Best wood tools out! Thanks
Posts: 114
Threads: 0
Joined: Sep 2009
For those curious (like me) cached version of the link
http://webcache.googleusercontent.com/se...clnk&gl=us
Posts: 22
Threads: 0
Joined: Sep 2009
Those are neat.I may get a set of those.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Michael
I do not know why they have to be stepped why not cylindrical?
https://www.pennstateind.com/store/LCENTLT1.html
Or there are other businesses that carry the same thing but little more $$
If you want something soft to help then
http://www.rubberchucky.com/store/c1/Fea...ducts.html
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 22
Threads: 0
Joined: Sep 2009
03-05-2017, 07:32 PM
(This post was last modified: 03-05-2017, 07:34 PM by Michael A. T..)
Being stepped with several different sizes would just be convenient and work good for the flute maker that makes flutes with different size bores
