cabinet door and router bit help/questions

[Wipedout]

I need to help a friend with some cabinet work.  I need to make a couple doors and some modeling and a cabinet extension.  On the plus side it's all paint grade and going to be repainted when I'm done.

My questions are on how to match all the profiles.  I've got a couple router tables at my disposal

Here are some pics of the existing I need to match,  some of them look like v groove but they are rounded over. 

Please let me know thoughts on how best to do the and what router bits you recommend. Thanks. Robert

1)[attachment=1632]

2)[attachment=1633]

3)[attachment=1634]

4)[attachment=1635]

5)[attachment=1636]

More pics in next post

[Wipedout]

More pictures

6)[attachment=1637]

7)[attachment=1638]

8)[attachment=1639]

This appears to be standard crown

9)[attachment=1640]

[JGrout]

point cutting roundover bits

60 degree vee groove bit

The cope and stick are 1/4 bead with a 1/4" groove 

The raised panel is going to be a search unless someone has seen it as a router bit , that is a fairly standard shaper knife.

the outer door profile is also a shaper knife I think MCLS or eagle has a similar one 

the crown does look standard you likely can pick some up at the borg 

Joe

[Wipedout]

Thanks Joe

Might have to rethink the doors.

[Stwood_]

Outer door profile is a 3 bead router bit, a profile I use. I'll post the whiteside number when I get around and out to the shop today.

[Wipedout]

Thanks Stwood

[Stwood_]

Whiteside 6023

[Stwood_]

These people will beat any advertised price.

https://ballewsaw.com/whiteside-6023-doo...3-4ld.html

[Wipedout]

Thanks

Really appreciate it!

[Wipedout]

Thanks for all the help Joe and STWood

They turned out close enough especially for paint grade

[attachment=1770]