Posts: 6,562
Threads: 2
Joined: Sep 2006
Location: North Florida
Great project. Saws love a till.
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Posts: 4,037
Threads: 0
Joined: Nov 2010
Got a little bit done this afternoon...
[attachment=1956]
Wards 78 and the results..
[attachment=1957]
Glued up the kerf board to the backer board
[attachment=1958]
layout toys, and my "dovetail saw"
[attachment=1959]
Chopped a bit..
[attachment=1960]
Then the flip side work. top piece for the two sides was also done.
No A/C in the shop, I am soaked, and tired out, time to take a break....
Stay tuned, the cussing has begun...
Show me a picture, I'll build a project from that
Posts: 6,562
Threads: 2
Joined: Sep 2006
Location: North Florida
Love the bench. I can almost smell turpentine...
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Posts: 4,037
Threads: 0
Joined: Nov 2010
More dovetails..
[attachment=1966]
Doing pins first. Then set things up to trace around the pins..
[attachment=1967]
Chopped the tails, dry fit the sides, top and bottom..
[attachment=1968]
To see how things will fit.
Spread a bit of glue around today...
[attachment=1969]
And shaped the handle rest with a spokeshave, a Millers Falls No. 56B plane and some sandpaper..
[attachment=1970]
Nice and round to hold the handles in place. later this evening, I might try to add a back to the til.....we'll see....
Show me a picture, I'll build a project from that
Posts: 4,037
Threads: 0
Joined: Nov 2010
PIP, anyone?
Floor show.....
Ok, when you walk down the steps to the Dungeon Shop, this is what you will see..
Then, the view from the bench area..
A place to hold the "horns" of the saw's handles..
Still needs a finish on the wood works....maybe later?
Smaller saws hang from pegs in the side of the til.....
I guess this will just have to do, for now....
Show me a picture, I'll build a project from that
Posts: 795
Threads: 0
Joined: Dec 2016
got some rough measurements? or did you just build it to fit the length of the saws?
Posts: 4,037
Threads: 0
Joined: Nov 2010
Used what scraps I had, and used a saw to help lay things out.
IF you want, I can get some measurements later tonight, and post them here...
Show me a picture, I'll build a project from that
Posts: 11,774
Threads: 1
Joined: May 2014
Location: South Central Oklahoma
Very nice
Jim in Okie
You can tell a lot about the character of a man -
By the way he treats those who can do nothing for him.
Posts: 2,331
Threads: 0
Joined: Nov 2005
Looks good and very useful. Thanks for posting.
"When I nod my head, hit it." - M. Howard.
"I think you should learn how to use hand tools before you even touch a power tool." - Sam Maloof
