Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
If it's broke you'll likely need to replace it, with that in mind I would go with junk lodged into the jaws, and spray it out with a parts breaker. I really like.
![[Image: kano-aerokroil-kroil-penetrating-oil_4499_600.jpg]](http://thereattastore.com/img/kano-aerokroil-kroil-penetrating-oil_4499_600.jpg)
Worst thing they can do is cook ya and eat ya
GW
Posts: 4,895
Threads: 0
Joined: May 2010
Had this happen with another brand. It was the screw that is in the center of the chuck remember that it is a left thread
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Spray it out with some kind of cleaner. Most likely there is some gunk or a piece of trash in the chuck. If its really bad then if its under 5 years old its under wartanty. You can print a shipping label and they will return it in a week. Way better than the several weeks it takes dw and months it takes ridgid to do repairs.
Posts: 40,073
Threads: 0
Joined: Apr 2007
I don't know what to do to fix it but I doubt that tool is too old so you might want to check on the warranty. I think it is 5 years
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 3,205
Threads: 0
Joined: Jul 2005
Thanks everyone. I'll see what I can do.
