Posts: 4,014
Threads: 0
Joined: Nov 2010
Might know where a handle might be..
[attachment=2990]
Maybe a whole stack?
[attachment=2991]
Not much help on the plates, though....
Disston D-16?
Show me a picture, I'll build a project from that
Posts: 6,562
Threads: 2
Joined: Sep 2006
Location: North Florida
The nut pattern does look D-16 ish. Does it have a wheat pattern? Maybe this saw CAN be saved.
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Posts: 4,014
Threads: 0
Joined: Nov 2010
I'll go later and see....I think I have one with, and one without wheat carving....
Show me a picture, I'll build a project from that
Posts: 4,014
Threads: 0
Joined: Nov 2010
Went and checked...have a D-16 style handle in both carved and plain styles Have no plates that will work with them, good ones, anyway. Even have a few bolts in brass and steel...medallions are stamped as Warranted Superior....there is an AAA Atkins medallion in the pile, as well.
Show me a picture, I'll build a project from that
Posts: 4,014
Threads: 0
Joined: Nov 2010
Actually they be a No. 16 handle. or...No. 76 handle
I did find the skew back plate for the Atkins saw....8ppi skew. I guess NOW I'll have to rehab that one, next...
The No. 16 and/or the No. 76 handles are orphans....
Show me a picture, I'll build a project from that
Posts: 4,014
Threads: 0
Joined: Nov 2010
Ah, pictures..
[attachment=2997]
The pair of Orphans
[attachment=2998]
This may be the "elder" of the two..
[attachment=2999]
However, this one does have the carving....The #2 holes do not line up between the two handles.
As for the Atkins handle?
[attachment=3000]
Sorry, have found a plate that matches..
[attachment=3001]
So I guess I'll have to clean it up.....would be nice to know it's model number, though.....I will try to find an etch..
Show me a picture, I'll build a project from that