07-06-2017, 10:40 AM
I have a MT2 Jacobs chuck but when I put it in the headstock it creeps out. Is there one that accepts a threaded drawbar?
Thanks
Thanks
▼ ▼ 
07-06-2017, 11:51 AM
littlemachineshop.com has several threaded arbors for drill chucks.
Example http://www.littlemachineshop.com/product...3&category= 
07-06-2017, 12:13 PM
I made my own. I drilled and tapped the end of my chuck and just use a piece of 3/16" threaded rod with a wing nut and a couple large washers run through the headstock as a drawbar.
07-06-2017, 12:15 PM
A soft rap with a wooden mallet keeps mine in place.
"Mongo only pawn in game of life." Mongo
07-06-2017, 12:56 PM
Use locktight on it.
 
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
07-06-2017, 09:38 PM
Herb
You are talking about something different then what he wants
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing. 
07-07-2017, 05:26 AM
Herb's right, PSI sells a chuck which is tapped for a drawbar.
Thanks all.
07-08-2017, 06:45 PM
Wow that is a new one on me. Sorry Herb
You have a link for me please.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing. |
|
Looking for a Jacobs chuck
|
|
|
|
|
Users browsing this thread: 2 Guest(s)