Woodnet Forums › › Active › Woodworking v
My panel glue up table top

▼
Stwood_ Offline
Member
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
#11
01-19-2018, 07:05 PM
is about used up I think. 10-15 years of gluing up door panels has filled it in with a lot of glue.
Laugh 
Time to make a new one I think. It's close to an inch deep in the middle.
Wonder how hot the old one will burn in the woodstove?
Laugh
Winkgrin
Winkgrin

[attachment=7389][attachment=7390]
Steve

Mo.


I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Find
Reply
▼
AgGEM Offline
Moving to front of line
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
#12
01-19-2018, 07:14 PM
Wow
Smile
Someone here has the tag line "you are not your post count".
But I think you could get extra credit for your glue droppings.
In some circles, it could be "high art".
Cool
Ag
Find
Reply
▼
Joel H. Offline
USAF Retired
Posts: 1,555
Threads: 0
Joined: Dec 2004
Location: Sumner Co, Tn
#13
01-19-2018, 07:45 PM
(01-19-2018, 07:14 PM)AgGEM Wrote: Wow
Smile
Someone here has the tag line "you are not your post count".
But I think you could get extra credit for your glue droppings.
In some circles, it could be "high art".  
Cool
Ag

When I first looked at the photos, I thought that was carpeting and couldn't figure out why you'd put carpet on a glue-up top.  Then Ag's comment made me look again.  Wow that is amazing.  I'll even bet you used to clean the glue droppings off it. 

Joel
USN (Corpsman) 1968-1972
USAF Retired Aug 31, 1994
Santa Rosa County, Fl Retired Jun 1, 2012
Now just a hobbiest enjoying woodworking!
Find
Reply
EdL Offline
Slow Day
Posts: 10,873
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
#14
01-19-2018, 09:33 PM
I'm calling the EPA.......
Laugh

Ed
Find
Reply
▼
Stwood_ Offline
Member
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
#15
01-19-2018, 11:06 PM
(01-19-2018, 09:33 PM)EdL Wrote: I'm calling the EPA.......  
Laugh

Ed


Uhoh
Uhoh
Uhoh
Laugh
Steve

Mo.


I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Find
Reply
Wild Turkey Offline
Honored Veteran and Retired Cold Warrior
Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
#16
01-20-2018, 04:34 PM
If you like the setup I'd attack it with a wide chisel and mallet and knock most of it off and start over
Wink

Or a belt sander on slow speed and 40 grit belt.

Got an air chisel? That might make quick work of it.
"Truth is a highway leading to freedom"  --Kris Kristofferson

Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Find
Reply
Bob10 Offline
Sir Member
Posts: 40,599
Threads: 0
Joined: Apr 2007
#17
01-20-2018, 04:57 PM
(01-19-2018, 07:05 PM)Stwood_ Wrote: is about used up I think. 10-15 years of gluing up door panels has filled it in with a lot of glue.
Laugh 
Time to make a new one I think. It's close to an inch deep in the middle.
Wonder how hot the old one will burn in the woodstove?
Laugh
Winkgrin
Winkgrin

Did you give it a go with a heat gun and wide knife
Laugh

Oh I know how to fix it!!   I have to find a picture

[Image: FN1KDGSIDBHXS11.MEDIUM.jpg]
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."


Phil Thien

women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.

Find
Reply
▼
Stwood_ Offline
Member
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
#18
01-20-2018, 08:06 PM
(01-20-2018, 04:34 PM)Wild Turkey Wrote: If you like the setup I'd attack it with a wide chisel and mallet and knock most of it off and start over
Wink

Or a belt sander on slow speed and 40 grit belt.

Got an air chisel?  That might make quick work of it.

That bottom board is 1/2 chipboard, and may not survive the chisel.
Laugh
I can probably build a new one in less time.


(01-20-2018, 04:57 PM)Bob10 Wrote: Did you give it a go with a heat gun and wide knife
Laugh

Oh I know how to fix it!!   I have to find a picture

[Image: FN1KDGSIDBHXS11.MEDIUM.jpg]

Router sled.
Cool
Steve

Mo.


I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Find
Reply
Thread Modes
My panel glue up table top


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.