▼
Posts: 587
Threads: 0
Joined: Sep 2005
Location: Bluffton SC
Hi,
I'm in need of a benchtop tablesaw to use in my garage. I now live in a 55+ community with a full shop. There are times I don't want to drive up just to rip one board. Plus, it's not open every day. I always buy the best possible so I'm not looking for a cheap piece of junk. It needs to make finished quality cuts.
Thanks
Mike
▼
Posts: 16,606
Threads: 2
Joined: Oct 1999
(02-23-2019, 11:02 AM)Mike 55 Wrote: Hi,
I'm in need of a benchtop tablesaw to use in my garage. I now live in a 55+ community with a full shop. There are times I don't want to drive up just to rip one board. Plus, it's not open every day. I always buy the best possible so I'm not looking for a cheap piece of junk. It needs to make finished quality cuts.
Thanks
Mike
Don't have a benchtop saw, but here's a start.
Doug
Posts: 4,676
Threads: 0
Joined: Jan 2007
Skip the portable bench top saws and acquire a track saw. Lighter weight, easier to move, transport and store. I find mine extremely accurate, has better dust control and is safer to operate. Best thing is that I don’t need any special jigs, miter gauges, and a host of safety items that
I may or may not use as required.
Any free advice given is worth double price paid.
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
I never thought that I would like this one but it's what my employer bought for me. Now that I've used it for a few months, I like it.
https://www.lowes.com/pd/dewalt-10-in-ca...BmEALw_wcB
I really like the new gear drive to raise and lower the blade, nice improvement.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 5,263
Threads: 0
Joined: Jul 2004
Location: Bluegrass of KY
I would take a hard look at the Ridgid.
1st class birdhouse builder/scrapwood mfg.
▼
Posts: 30,415
Threads: 1
Joined: Dec 2002
Location: DuPage County, Illinois, USA
02-24-2019, 04:40 PM
(This post was last modified: 02-24-2019, 05:04 PM by Cian.)
(02-24-2019, 09:51 AM)messmaker Wrote: I would take a hard look at the Ridgid.
This. I don't use it often, but I'm always impressed by my portable Ridgid. The equivalent Bosch is also very good. They've even improved a few things since I bought mine like a riving knife.
![[Image: 20080208_Woodshop_a.jpg]](http://www.cianperez.com/photos/d/8050-2/20080208_Woodshop_a.jpg)
▼
Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
(02-24-2019, 04:40 PM)Cian Wrote: This. I don't use it often, but I'm always impressed by my portable Ridgid. The equivalent Bosch is also very good. They've even improved a few things since I bought mine like a riving knife.
I had a very large saw, a Delta 12/14 and sold it a few months ago and picked up a Bosch 4100-09 with the gravity rise stand. Its the slightly earlier model and has a few more metal parts instead of plastic. I haven't used it much since I got it late in the year, but the few cuts I made were very clean and square. I got it for about 100 off the store price, since it was old stock and I got a military discount to boot.
I could have gotten the Ridgid or the Hitachi for about a hundred or so less. They are also nice saws but I liked the fence on the Bosch better.
This is the best review I found when I was looking:
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
(02-24-2019, 09:51 AM)messmaker Wrote: I would take a hard look at the Ridgid.
I have an older Ridgid contractor saw, love it. I had a Ridgid jobsite saw, hated it for one reason only. The throat plate was just a piece of sheet steel. Due to the design, I never could make a ZCI, maybe I didn't think it through.
I still prefer the Dewalt, just my opinion.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 706
Threads: 37
Joined: May 2000
Location: Southeast, Florida
(02-23-2019, 11:02 AM)Mike 55 Wrote: Hi,
I'm in need of a benchtop tablesaw to use in my garage. I now live in a 55+ community with a full shop. There are times I don't want to drive up just to rip one board. Plus, it's not open every day. I always buy the best possible so I'm not looking for a cheap piece of junk. It needs to make finished quality cuts.
Thanks
Mike
My first table saw was the Dewalt benchtop. It had enough power to do what I wanted and it was square and accurate. It could also take a Dado blade. The rack and pinion fence was pretty cool too. I have never used the Bosch but in support of Bosch, they are one of my favorite companies so I bet their saw is a solid choice too.
Posts: 1,841
Threads: 0
Joined: Aug 2006
Location: Lynn Haven, FL
(02-23-2019, 11:02 AM)Mike 55 Wrote: Hi,
I'm in need of a benchtop tablesaw to use in my garage. I now live in a 55+ community with a full shop. There are times I don't want to drive up just to rip one board. Plus, it's not open every day. I always buy the best possible so I'm not looking for a cheap piece of junk. It needs to make finished quality cuts.
Thanks
Mike
Mike,
I posed a similar request here about a year ago, and though I have a Festool track saw, I needed a table saw for small pieces that were repeatable.
I received a number of suggestions including Rigid, DeWalt, and others, but I settled on the Bosch job-site saw because it had a fold-up capability and took up minimum
m floor space when not needed. It has met all my expectations.
BTW, I moved from a basement shop in Ohio to a garage shop in the Florida panhandle.
r2
|
