Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I heard they always trashed the blade beyond use. Maybe they've changed things.
No, I don't have one.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 2,381
Threads: 0
Joined: Dec 2011
06-24-2019, 07:45 PM
(This post was last modified: 06-24-2019, 07:45 PM by Handplanesandmore.)
Official advice from SS (FAQ) -
"When the safety system activates, it will sometimes damage one or more teeth on the blade. Some users discard and replace the blade, while others choose to have their blades inspected/repaired by a qualified specialist."
I would not use a blade after the activation without it getting checked, as any loose tooth could shoot like a bullet.
Simon
Posts: 12,597
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
What Simon said: I'd inspect it and evaluate whether it's trashed (cracked plate, bent tooth, etc.), if not send it in for professional inspection/resharpening. I would not put it back on the saw and continue on.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 8,371
Threads: 1
Joined: Mar 2000
I activated one some years back when the extruded aluminum fence on the my miter contacted the blade.
I didn't try to extract the blade from the brake block. I eventually gave the whole fused blade/brake assembly to a local HS teacher; they have SS saw(s) in the school shop. The teacher uses it as an object lesson when starting the year out with the safety lessons.
Maybe I'd try to salvage the blade if I buried a Forrest WWII Blade in it, but my blade was a mid-range Freud combo blade that already had a couple of sharpening sessions on it.
No way would I have put the same blade back on the saw immediately without a close inspection for damage and then a sharpening, regardless of brand.
Posts: 1,539
Threads: 0
Joined: Oct 2003
Location: Columbus, Ohio
The blade could easily have a defect that can't be seen with the eye. Be safe - start with a new blade.
Lonnie
Posts: 9,459
Threads: 0
Joined: Dec 2004
If it is a good blade, send to Forrest and have them inspect and sharpen. Will be good as new if they send it back fixed/sharpened.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Do those things go off when you hit a small nail or staple?
Posts: 27,905
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
I’ve cut through staples and small nails on my SS. So far I haven’t set of the brake.
VH07V
