Posts: 10,201
Threads: 0
Joined: Mar 2001
(11-16-2019, 08:06 PM)MauleSkinner Wrote: I know...take it in the house!
My shop is a (mostly) unheated garage. Does anybody have any ideas for a small "warming oven" to keep my glues from freezing? Maybe something I could run on a thermostat.
Thanks
A wood box that is insulated and a light bulb will work. An old refrigerator and a light bulb will work too but is pretty big just for glue. WOOD magazine has this
https://www.woodmagazine.com/wood-suppli...eated-shop
Al
Some people are like a Slinky. Not really good for anything but still bring a smile to your face when you push them down a flight of stairs.
A dead enemy is a peaceful enemy. Blessed are the peacemakers.
Posts: 30,564
Threads: 3
Joined: Sep 2003
Location: Saginaw, MI
(11-16-2019, 08:06 PM)MauleSkinner Wrote: I know...take it in the house!
My shop is a (mostly) unheated garage. Does anybody have any ideas for a small "warming oven" to keep my glues from freezing? Maybe something I could run on a thermostat.
Thanks
In the past I’ve used an Omaha Steaks insulated shipping box with a nite lite installed. Much like the WOOD magazine article. Has worked for years. This year shop will be heated all the time albeit the thermostat turned way down at night.
Jim
There is a good chance
Broccoli doesn’t like you either.
Posts: 2,036
Threads: 0
Joined: Jan 2003
Buy the brand made with spring water!
Sorry I had to try to be funny!
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(11-16-2019, 08:06 PM)MauleSkinner Wrote: I know...take it in the house!
My shop is a (mostly) unheated garage. Does anybody have any ideas for a small "warming oven" to keep my glues from freezing? Maybe something I could run on a thermostat.
Thanks
I asked this question also...
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
The light bulb heated box trick works. It's basically how outdoor soda machines keep things from freezing. You will need to choose a bulb that puts out heat. Sometimes, LED's won't heat enough to work. Old style incandescent bulbs work best.
Still Learning,
Allan Hill
Posts: 2,201
Threads: 0
Joined: Dec 2006
Thanks all! Looks like the light bulb thing is pretty simple.
AHill...Yes, I need to make sure the wood is at a reasonable temp as well. We just get a few cold snaps here, and then things warm back up again, so I'm looking more at a week of storage before I go back out in the shop.
Aram...Apparently my search skills aren't that good. I actually DID look for something.
Posts: 2,201
Threads: 0
Joined: Dec 2006
Just to increase the Rube Goldberg effect, what do you guys think of adding a baseboard thermostat to the cooler/lamp circuit? I’d think it would be best served to have the thermostat inside the cooler...
https://m.youtube.com/watch?v=FZkSCud6tIY
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Look around for a junker apartment size frig and turn it into your glue heater.
Or as above, build a box
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
