Posts: 22,296
Threads: 0
Joined: Oct 2003
Brass plate? ......
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
Fit some scrap plexiglass around the knob.
Holesaw for the center cut, bandsaw for the outer cut.
A couple of plated, well places \/ head screws to hold it on.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 12,996
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(04-10-2020, 02:20 PM)p_leyden Wrote: My bathroom door was painted with latex paint which takes a beating from normal traffic, especially around the door knob area.
I am looking for ideas for low cost protection for that immediate area.
PS - in the future I will never paint any door with latex paint.Alkyd paint is tough and flows out like a spray paint job!
Thanks for any and all ideas, Pete Leyden
Train the occupants to use the handle. Drives me nuts why people put their hands on the woodwork. My parents beat that into our heads when I was young. Too bad my wife's parents didn't feel the need.
John