PC 7549 repair

[Gary G™]

Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778

Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.

Ideas where a replacement might be had? Ace maybe?

[Cabinet Monkey]

try abearing supply house .   I can't imagine PC used something special or proprietary for this .

[Gary G™]

Thanks.........17

[Bit_Fiddler]

Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778

Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.

Ideas where a replacement might be had? Ace maybe?

My local Ace has a good selection of miscellaneous hardware - I've picked up oddball stuff like this from them quite often.   A few times I've been able to upgrade to a higher grade bolt than OEM to fix a situation like this.  Definitely worth trying - it might be the easy button.

[Bob Vaughan]

Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778

Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.

Ideas where a replacement might be had? Ace maybe?

Try here:
http://www.northcantonrepairshop.com

[Stwood_]

Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778

Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.

Ideas where a replacement might be had? Ace maybe?

https://www.ebay.com/c/671335040