Posts: 428
Threads: 0
Joined: Apr 2006
(06-13-2022, 01:07 PM)MT Woodworker Wrote: Hi
Any thoughts on the use of these tools?
Scale for size reference.
Thanks
Bottom two are what I'd call a Cape chisel. For metal work, useful to have if the need arises. Sort of used the same way that a woodworking chisel would be but for metal. The bottom one looks like edge is either very dull or reground and is realistically just a cold chisel now. Top one i can't tell - maybe a bearing scraper?
Andrew
Posts: 527
Threads: 0
Joined: Feb 2021
Location: Stevi, Montana
Thanks for the answers. They were my grandfather’s tools.
Mark
Posts: 311
Threads: 0
Joined: May 2012
06-15-2022, 09:13 PM
(This post was last modified: 06-15-2022, 09:19 PM by Bucko.)
1980 found me as a Pipefitter Apprentice and bottom ones look like Gouge Chisels we had to remove broken pieces of threaded male pipe broken off / stuck in female fittings .
What the Heck, Give it a Try
Posts: 4,037
Threads: 0
Joined: Nov 2010
A Cape chisel was also used to cut new key-way slots onto steel shafts....
Show me a picture, I'll build a project from that
Posts: 2,037
Threads: 0
Joined: Jan 2003
I learned something new again. I have a few "cape chisels" and I never knew what they were for.
Posts: 4,037
Threads: 0
Joined: Nov 2010
And, will also clean up any "Boogered up" slots....
Show me a picture, I'll build a project from that
Posts: 869
Threads: 0
Joined: Jun 2008
Bottom one is a ruler, but some people call it a scale.
(Sorry guys couldn’t resist)
