#11
Even with a 10% discount...
   
That Stanley 2-3/8" iron was $12..but..
   
Was $90 + tax!  Union No. 41...from BEFORE Stanley ground off the "UNION" labels...

Has both 5/16" cutters.

Asking price was $100....got the 20% off Offer cut to 10%...
A bit of chipping at the base of the knob...otherwise it is in fine shape..


Was that kind of a day, yesterday..
   
And..OUCH!
   
Could have gotten a wooden Match set...
   
But, went with the Union #41 instead...

Simple rule:  IF a tool is in one of these..
   
And they have to come and unlock the doors...$$$....a very late model Stanley #4-1/2 (post WW2 era) was $125+tax?
Saws?
   
There was a saw hanging just above this one...
   
Road Trip was a bit expensive....
Show me a picture, I'll build a project from that
Reply

#12
You sure find some good stuff Bandit!
Mark Singleton

Bene vivendo est optimum vindictae


The Laws of Physics do not care about your Politics   -  Me
Reply
#13
1st yard sale of the season, yesterday...found this..
[attachment=50714]

Only cost me..
[attachment=50715]
$1....

As for that plane iron?
[attachment=50716]
That has the original Price tag still on it...that I paid $12 for?   Price tag says...$ 1.58.....Inflation, right.

Keystone HDW INC....Cincinnati, OH.
Show me a picture, I'll build a project from that
Reply
#14
That Union No. 41, has been sent out to have it's Nickel Plating redone....also along for the trip...A Stanley No. 39 . 3/8" Dado plane....thinking I can keep it shiny better, than having rust where the Japanning was getting worn off...Stanley might not have Nickel Plated them..but, I am not Stanley....
Show me a picture, I'll build a project from that
Reply
#15
Ok..this was also sent along..
[attachment=50941]
As it did fit into the case of another plane that went along with the Union No. 41..
[attachment=50942]
This is how they wound up....all nickel plated, and issues fixed..
[attachment=50943]
Like bad bolts replaced, and a new nicker...and..
[attachment=50944]
The front knob has been replaced...Old one was chipped up....Fence now also works much better..
Show me a picture, I'll build a project from that
Reply
#16
Union No. 41 is not just another Pretty Face in the shop....
[attachment=51405]
It IS a WORKING Plane...
[attachment=51406]

Going to need to build a Case to house it in..
Show me a picture, I'll build a project from that
Reply
#17
Today's "Not a $21 Plane" is...
[attachment=51448]
A Sargent No. 409...
[attachment=51449]
Says so right in front of the rear handle.
price?   $29.49....

haven't done much to it, yet...just got it home..not even sure what "Type" it is, yet..
Stay tuned...
Show me a picture, I'll build a project from that
Reply
#18
Sargent #409, Type 2-3....

$29.49
[attachment=51483]
Iron does have a chip in it...
[attachment=51484]
But, it will match up to the #410c..
[attachment=51485]
As for the "other plane" in these pictures?
[attachment=51486]
That be the Millers Falls No. 15, Type 3....with the 2-1/4" wide iron.  And, Steel hardware instead of Brass...

Also, while out and about..picked the smaller of these 2..
[attachment=51487]
Handle on the "new" Bevel Gauge is 4"...Price was $4..top one is a Sargent's Patent...Stanley called these both No. 18?
Show me a picture, I'll build a project from that
Reply
#19
2 planes in use, today....
[attachment=51493]
Millers Falls No. 15, Type 3 ($40+Tax)

and to smooth things out after it got done..
[attachment=51494]
A Stanley No. 4-1/2c, type 11...
[attachment=51495]
That cost me $80 + Tax...

Both are tuned up, and working just fine...
[attachment=51496]
At making a lot of see through shavings...
Show me a picture, I'll build a project from that
Reply
NOT another $21 plane


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.