08-04-2024, 05:19 PM
(This post was last modified: 08-04-2024, 05:39 PM by wood-chips.)
I’ve built a few things lately but haven’t posted pictures, just been looking at others projects/builds. I got started on Christmas projects early this year and completed this moxon vise for a friend for Christmas. His work holding/clamping is severely lacking. I watched several moxon builds and I combined the best features of each with my own design/features that makes it more than a moxon vise.
I Bought the crank handles and 2” delrin on Amazon. I made 3/8” spacers from the delrin. I bought 1/2” washers and bored them out to 17mm, the size of the acme shaft. I bought the springs from ACE hardware. I added cubber to the faces with double stick tape. Both vise faces have clamping/hold down capabilities to provide added flexibility. Finally it’s finished with WATCO.
I Bought the crank handles and 2” delrin on Amazon. I made 3/8” spacers from the delrin. I bought 1/2” washers and bored them out to 17mm, the size of the acme shaft. I bought the springs from ACE hardware. I added cubber to the faces with double stick tape. Both vise faces have clamping/hold down capabilities to provide added flexibility. Finally it’s finished with WATCO.
