Wood shavings bowl

[mtrainer90]

Making a bowl out of some large Black walnut, Red Cedar & Honey locust shavings and Alumilite clear slow Resin. Finished with General Finish's wood bowl finish and Acks paste. Because of the quick cure time, even with a pressure pot, there were a lot of bubbles trapped between the shavings unfortunately. All though a deep pour slower curing resin would have been more ideal, this was an attempt to use up the rest of the batch of resin I had before it got too old and went bad

[EightFingers]

Great way to use up everything!

[MKepke]

Nice.

That has a really neat visual effect in the depth of field, even though I am generally not a fan of the 'let's cover everything in epoxy' trend.

-Mark

[mtrainer90]

Nice.

That has a really neat visual effect in the depth of field, even though I am generally not a fan of the 'let's cover everything in epoxy' trend.

-Mark

Some people dont like resin but I find it is a very good way to fill voids or spaces on pieces that otherwise would be to far gone to turn