The In-between Projects phase..

[bandit571]

Project is completed...now what.   Shop needs a good, thorough straightening up...tools to sharpen, tools to put away....and find out what is buried under the mess..

Maybe a week's worth of work?  

Meantime?    Will be watching/reading other people's Build Threads.....Get busy..

[bandit571]

Cleaned the bench..
[attachment=53009]
Machines put away, where they belong..
[attachment=53010]
area behind the Mitersaw has been cleaned up...found a good saw, too...
[attachment=53011]
Space has been cleaned up, swept up...weather permitting, that full trash can will get burned in the Fire Pit...
[attachment=53012]
Router Table has been stowed away...
[attachment=53013]
Found this in a pile of dirt...bit was broken off, rusted up.....cleaned the rust, freed up the internals...replaced the broken drill bit...
As for the saw I found?
[attachment=53014]
Etch was still readable....This is a Disston No. D8 ( no hyphen, 8 is inside of the D) 22" long Panel saw, 11 ppi.
[attachment=53015]
And that was the only defect I found...

Went through all the leftovers from the last Project....cut out the worst sections, resaw the remaining pieces to 1/2" thick...will be starting up a new "Build Along" thread...soon...

[stav]

Its a good day when you find a random saw you didn't know about in your shop.