07-27-2016, 06:36 PM
Took 4 machines out of storage, all had been sitting for 8 months. All are 230V x PH-3 .. All are run off a 20Hp Phase perfect and a 3 phase load center.
First machine runs backwards. ( Jointer ) .. Ugh. no problem.. change 2 wires .. all good.
Second machine, (Wide Belt sander) .. Connect compressed air, turn power on .. dead. nothing.. no lights.. nada.. zip .. Ugh ..
Third machine ( Planer ) Try to raise or lower the bed ( Electric ) .. It makes a moaning sound and trips the Phase Converter. Ugh...
Fourth machine . ( Edge Sander ) .. Just dead. no symptoms.
Batting 1 of 4 .. Ugh .. Frustrated.
First machine runs backwards. ( Jointer ) .. Ugh. no problem.. change 2 wires .. all good.
Second machine, (Wide Belt sander) .. Connect compressed air, turn power on .. dead. nothing.. no lights.. nada.. zip .. Ugh ..
Third machine ( Planer ) Try to raise or lower the bed ( Electric ) .. It makes a moaning sound and trips the Phase Converter. Ugh...
Fourth machine . ( Edge Sander ) .. Just dead. no symptoms.
Batting 1 of 4 .. Ugh .. Frustrated.
Achieving life is not the equivalent of avoiding death.
Ayn Rand
Ayn Rand